Table of Contents
Advertisement
When the authentication setting is enabled, the following settings are required.
[Security Settings] on the main menu.
7) Select [Network Control] and enter the desired authentication password. *
see Note1
8) Click the [Apply] button to save the settings. * see Note2
NOTE1
• The Authentication Password will be the same for [Network Control
Port (Port: 9716)].
NOTE2
changed. The network connection can be restarted using [Network Restart] on
the main menu.
e-SHOT (Still Image Transfer) Transmission
download it from the Hitachi web site. Refer to the manual for the application for
instructions.
,
e-SHOT(Still Image Transfer) Display
, and [Image Transfer
Advertisement
Table of Contents
