Table of Contents
Advertisement
Item
Daylight Savings Time
Start
Month
Week
Day
Hour
Minute
End
Month
Week
Day
Hour
Minute
Time difference
SNTP
SNTP Server IP Address
Cycle
Click the [Apply] button to save the settings.
NOTE
•
network connection can be restarted using [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
• To enable the SNTP function, the time difference must be set.
• The projector will retrieve DATE and TIME information from the Timeserver
and override time settings when SNTP is enabled.
• The Internal Clock's time may not remain accurate. Using SNTP is
recommended to maintain accurate time.
Click the [ON] check box to enable daylight savings time and
set the following items.
(Sun, Mon, Tue, Wed, Thu, Fri, Sat).
(Sun, Mon, Tue, Wed, Thu, Fri, Sat).
Set the same time difference as the one set on your PC. If
unsure, consult your network administrator.
Click the [ON] check box to retrieve Date and Time
information from the SNTP server and set the following items.
information from the SNTP server. (hours:minutes).
Description
Settings
Advertisement
Table of Contents
