Table of Contents
Advertisement
SCREEN Menu (continued)
Item
MESSAGE
SOURCE NAME
TURN ON
TURN OFF
When the TURN ON is selected, the following message function works.
"AUTO IN PROGRESS" while automatically adjusting
"NO INPUT IS DETECTED"
"SYNC IS OUT OF RANGE"
"Searching...." while searching for the input
"Detecting...." while an input signal is detected
The indication of the input signal displayed by changing
The indication of the aspect ratio displayed by changing
The indication of the PICTURE MODE displayed by changing
The indication of the ACTIVE IRIS displayed by changing
The indication of the MY MEMORY displayed by changing
The indication of "FREEZE" and "II" while freezing the screen by
pressing the FREEZE button.
• When the TURN OFF is selected, please remember if the picture
is freezing. Do not mistake freezing for a malfunction (
Each input port for this projector can have a name applied to it.
(1) Use the
buttons on the SCREEN menu to
select SOURCE NAME and press the
The SOURCE NAME menu will be displayed.
NAME menu to select the port to be named
The SOURCE NAME dialog will be displayed.
(3) The current name will be displayed on the
ENTER or INPUT button to select and enter
characters. The RESET button can be used to
erase 1 character at a time. The name can be a
maximum of 16 characters.
(4) To change an already inserted character, press
the
row to move the cursor to the name displayed on
character to be changed. Once a character in the
name is selected use the
cursor back down to the character entry area to
select and enter characters as described above.
(5) Select
and press the ENTER or
To revert to the previous name without
and the INPUT button simultaneously.
Description
button.
buttons and the
buttons to select
button to move the
SCREEN Menu
21).
41
Advertisement
Table of Contents
