Table of Contents
Advertisement
OPTION Menu (continued)
Item
AUTO OFF
LAMP TIME
FILTER TIME
(continued on next page)
automatically turn the projector off.
Long (max. 99 minutes)
AUTO OFF
ENABLE
When the time is set to 0, the projector is not turned off automatically.
When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector
lamp will be turned off.
If one of the projector's buttons or the remote control buttons
is pressed or one of the commands (except get commands) is
transmitted to the control port during the corresponding time,
projector will not be turned off.
Please refer to the section "Turning off the power" (
The lamp time is the time counted after the last resetting. It is
shown in the OPTION menu as the usage time of the lamp.
of the projector displays a dialog.
RESET
CANCEL
• Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
• For the lamp replacement, see the section "Lamp" (
of the projector displays a dialog.
RESET
CANCEL
•
•
Description
Short (min. 0 minute = DISABLE)
1
OPTION Menu
AUTO OFF
DISABLE
0
16).
56, 57).
(
58, 59).
43
Advertisement
Table of Contents
