Table of Contents
Advertisement
OPTION Menu
OPTION Menu (continued)
Item
SERVICE
(continued on next page)
46
KEY LOCK
TURN ON is selected, the buttons on the projector except the
STANDBY/ON button are locked.
TURN ON
TURN OFF
• Please use to avoid a mischief and touching accidentally. This
function does not have any effect on the remote control.
REMOTE RECEIV.
1:FRONT
2:TOP
(2) Switch it using the ENTER button
(off)
(on)
• A sensor cannot be turned off when the other
two are off. Always at least one sensor is on.
REMOTE FREQ.
setting (
14).
1:NORMAL
2:HIGH
Items with a checkmark are on. The factory
default setting is for both 1:NORMAL and 2:
HIGH to be on. If the remote control does not
function correctly set the this to either only
1 or only 2 as described in Remote Control
Settings (
14).
Neither can be turned off at the same time.
INFORMATION
Selecting this item displays a dialog titled "INPUT INFORMATION".
It shows the information about the current input.
INPUT-INFORMATION
RGB1
1024x768 @60Hz
FRAME LOCK
• The "FRAME LOCK" message on the dialog means the frame lock
function is working.
• The "SCART RGB" message means the COMPONENT VIDEO
port is working as a SCART RGB input port. Please refer to the
COMPONENT item in INPUT menu (
• This item can't be selected for no signal and sync out.
FACTORY RESET
this function, all the items in all of menus will collectively return to
the initial setting. Note that the items LAMP TIME, FILTER TIME,
LANGUAGE and SECURITY are not reset.
RESET
CANCEL
Description
3:REAR
INPUT-INFORMATION
S-VIDEO
SECAM
AUTO
32).
INPUT-INFORMATION
COMPONENT
576i @50
SCART RGB
Advertisement
Table of Contents
