Table of Contents
Advertisement
Adjusting the zoom and focus
1.
Use the zoom ring to adjust the screen size.
2.
Use the focus ring to focus the picture.
Adjusting the lens shift
1.
Use the vertical lens shift dial to shift
the picture upward or downward.
2.
Use the horizontal lens shift dial to
shift the picture left or right.
NOTE • When the vertical lens
shift is adjusted, it is recommended to
shift the picture upward.
Using the automatic adjustment feature
1.
Press the AUTO button on the remote control.
For an RGB signal
The vertical position, the horizontal position, the horizontal
phase and the horizontal size will be automatically adjusted.
And the aspect ratio will be automatically set to default. Make sure that the
application window is set to its maximum size prior to attempting to use this
feature. A dark picture may still be incorrectly adjusted. Use a bright picture
when adjusting.
For an M1-D signal
The aspect ratio will be automatically set to default.
For a video signal or s-video signal
The video format best suited for the respective input signal will be selected
automatically.
This function is available only when the AUTO is selected to the VIDEO
FORMAT item in INPUT menu
For a video signal, s-video signal or component video signal
The vertical position, horizontal position and aspect ratio will be automatically
set to default.
For a component video signal
The horizontal phase will be automatically set to default.
note that it may not function correctly with some input.
Zoom ring
2/5
1/10
1/10
(
. For a component video signal, the
32)
Operating
Focus ring
Top
UP
Lens shift cover
DOWN
RIGHT
LEFT
ENTER
PAGE UP
ESC
MENU
POSITION
AUTO
MAGNIFY
MY BUTTON
PAGE DOWN
RESET
VOLUME
19
Advertisement
Table of Contents
