Table of Contents
Advertisement
Press " " or " " button to change the preset.
In equalizer menu, the preset can be changed
to Music , Movie , Speech , Flat , Classic and
User .
Select the desired frequency by pressing "
" or " " button and increase or decrease the
frequency gain by pressing " " or " " button.
Press the " MENU " button to return to the
previous menu.
Note : Equalizer menu settings can be changed only
when the Equalizer Mode is in User .
Balance
This setting is used for emphasizing left or right
speaker balance.
Press " " or " " button to select Balance.
Press " " or " " button to change the level of
the balance. Balance level can be adjusted
between -32 and + 32.
Headphone
Press " " or " " button to select Headphone .
Press " " button to view the headphone
menu.
Headphone sub-menu options are described
below:
Volume
Press " " or " " button to select Volume . Press
" " button to increase headphone volume
level. Press " " button to decrease headphone
volume level. Headphone volume level can be
adjusted between 0 and 63 .
Store
Press " " or " " button to select Store. Press "
" or OK button to store the settings. " Stored... "
will be displayed on the screen .
Sound Mode
Press " " or " " button to select Sound Mode .
Using " " or " " button, you can select Mono,
Stereo, Dual I or Dual II mode, only if the
selected channel supports that mode.
AVL
Automatic Volume Limiting (AVL) function
adjusts the sound to obtain xed output level
between programmes (For instance, volume
level of advertisements tend to be louder than
programmes).
Press " " or " " button to select AVL . Press " "
or " " button to set the AVL as On or Off .
Audio Out
Press " " or " " button to select Audio Out.
Press " " or " " button to set the Audio Out as
Speaker or LineOut/SPDIF.
If you select to Audio Out as LineOut/SPDIF,
you will get audio through the active audio
connectors. In this case, audio output will not
be available through TV speakers and mute
function cannot be used.
While LineOut/SPDIF is activated, if you press
volume " " / " " or mute button on your remote
control, the Audio Out indicaticator will be
displayed on the screen.
If you select to Audio Out as "Speaker" by using
" " or " " button, you can get audio through the
TV's speakers.
SRS TruSurr XT
By pressing " " or " " select SRS TruSurr XT .
Press " " or " " button to set SRS TruSurr XT
as on or off.
Note: If you set SRS TruSurr XT as On, some features
in the Sound menu can be unavailable to be set.
Effect
If you are watching a mono broadcast, set Effect
on to obtain a better sound effect which will be
more stereo-like. If the current sound system is
stereo, switching this effect on will give a more
spatial effect.
English - 35 -
Advertisement
Table of Contents
