Some Digital Terrestrial channels operate
on a Pay Per View basis. These require a
subscription and a hardware decoder.
Obtain the Conditional Access Module (CAM)
and the viewing card by subscribing to a pay
channel company, then insert those to the TV
using the following procedure.
• Switch off the TV and unplug from the
• Insert the CAM and then the viewing card to the
slot that is located in the terminal cover at the
left-hand side of the TV (from front view).
• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM
or the TV terminal may be damaged if the CAM
is forcefully inserted.
• Connect the TV to the mains supply, switch
on and then wait for few moments until the
card is activated.
• Some CAMs may require the following set
up. Please set the CAM by entering the IDTV
menu, Conditional Access then pressing the
OK button. (CAM set up menu is not displayed
when it is not required.)
• To see the viewing contract information:
enter IDTV; press the " MENU " button, then
highlight Conditional Access and press the
• When no module is inserted, "No Conditional
Access module detected" message appears
on the screen.
• Refer to the module instruction manual for
details of the settings.
NOTE: Insert or remove the CI module only when the
TV is in STAND-BY mode or SWITCHED OFF.
You can use this item to display the TV
The digital TV Setup menu screen is accessed
from the main menu. Press the "MENU" button
to display the main menu and use " " or " "
button to highlight "TV Setup", press the OK
button to display TV Setup menu screen.
You can nd detailed information for all menu
items in "Analogue TV Menu System" section.
The adjustments in this menu are given as the
You can con gure the settings of your TV. Select
Con guration from Setup menu and press OK
to view this menu. Press the RETURN button
on the remote control to exit.
AC3 Audio (* for EU countries only)
In the Con guration Menu, highlight the AC3
Audio item by pressing " " or " " buttons. Use
the " " or " " buttons to set the AC3 Audio as
On or Off.
If the channel that you are watching supports
AC3 Audio, turn this setting on.
Hard of Hearing (* for EU countries only)
Use " " or " " button to select Hard of Hearing
and then press " " or " " button to set this
setting as On or Off.
English - 26 -