19"LCD TV
7. White Balance, Luminance Adjustment
1. ADC Calibration
1.1. ADC Calibration
ADC
1.1.1 Prepare
1) Power on the Chorma 22291/23291 and power on the PC.
2)Change TV Source to PC mode。
3) Connect PC Com3 to Chroma 22291/23291 RS-232 connector. Make sure USB-to-Serial Com to Com7.
1.1.2 ADC Picture
1.1.3 ADC Adjust
1)Open the program,press the Config button,if serial Comm open fail, then you must check whether Com3 and
Com7 are exist。
2)If step one is OK,press the PROGRAM button start adjustment。
3) If adjust successful , "ADC" will be green, as
as
。
Component
Timing:314
Pattern:185
19LD4550U
720P/50HZ
RGB-PC
Timing:137
Pattern:42
1024*768/50HZ
。 If adjust fail ,"ADC" will be red,
74
Hitachi 19LD4550U