Balance; Headphone; Volume; Sound Mode - Hitachi L26H01U Instructions For Use Manual

Note: Equalizer menu settings can be altered
only when the Equalizer Mode is in User.

Balance

b
By pressing /
a
to change the level of the balance.Balance level can
be adjusted between -32 and +32.

Headphone

By pressing /
a
`
button to enter hedphone menu.

volume

By pressing /
a
button to increase hp volume level. Press
decrease hp volume level. Headphone volume level
can be adjusted between 0 and 63.

sound mode

b
By pressing /
a
_ `
/ button to change sound mode.
Sound mode is used to identify sound mode of the
headphone and can be set to mono, stereo, dual I or
dual II according to the transmission.
balance
By pressing /
a
button to increase balance to the right. Press
to decrease balance to the left. Balance level can be
adjusted between -32 and +32.
Press the MENU button to return to the previous menu.
Sound Mode
By pressing /
a
button, you can select Mono, Stereo, Dual I or Dual II
mode, only if the selected channel supports that mode.

AVL

b
By pressing /
a
set the AVL as on or off.

Effect

By pressing /
a
to set Effect as on or off.

Dynamic Bass

Dynamic Bass is used to increase bass effect of the
TV set.
By pressing /
a
_ `
pressing / button set Dynamic bass to Low, High
or Off. It is not recommended to select High if listening
at high volume levels. There is a subwoofer output
that can accept an active subwoofer if you wish to
create very high levels of Bass.
Subwoofer is active only if Dynamic Bass is set to
Off.
Downloaded From TV-Manual.com Manuals
select Balance.Press
b
button, select Headphone. Press
b
button, select Volume. Press
button, select Sound Mode. Press
b
button, select Balance. Press
b
select Sound Mode. Press
_
select AVL. Press
b
select Effect. Press
b
button, select Dynamic Bass. By

Subwoofer

It is possible to connect an external, active subwoofer
to the set to give a much deeper bass effect.
By pressing
_ `
/ button
Subwoofer can be set to On or Off.
Dynamic Bass is not available if Subwoofer is set to
On.
Set Subwoofer to On when you connect an external
subwoofer to the set.

3DS

By pressing
`
set to On or Off.
_
button to
Set 3DS to On when you connect an external
subwoofer to the set.

Store

• By pressing
• Press
“Stored” will be displayed on the screen.
`
_
button
_ `
/
`
/ button to
_ `
/ button
- 22 -
b
/ button, select Subwoofer.
a
b
/ button, select 3DS. 3DS can be
a
b
/ button select Store.
a
`
or OK button to store the adjustments.