Table of Contents
Advertisement
Output Gain
The gain of each output is adjustable from +30 dB to –100 dB in 0.1 dB steps. After –100 dB gain is
set to –Inf, which means that output is present, but muted.
Output Polarity
If set to "Norm" output polarity is the same as input polarity, if set to "Inv" the output polarity is
inverted. This can be used to correct polarity errors in the input signals fed to the card.
Tone Frequency
This sets the frequency of the test tone for each of the four tone generators. Each of the four tone
generators TG1 – TG4 can be set to a different frequency, and are available as audio sources for the
embedded or AES audio outputs. The tones can range from 50Hz to 16kHz.
Display Submenu
Menu Structure
Disp
Display Orientation
This parameter lets you change the orientation of the display. "Vert" makes the characters look correct
when the cards are mounted in a 2 RU frame like the 8310. "Horz" makes the characters look right in a
horizontal frame.
Display Brightness
This parameter allows you to set the standard output brightness of the menu display. It is a percentage
of maximum brightness.
Preset Submenu
MENU STRUCTURE
Prst
Select Preset
Select from one of the five saved presets.
Save Settings
In this parameter, move the toggle switch up to save the settings to the card persistent storage.
Load Settings
In this parameter, move the toggle switch up to load the saved settings and make them active.
9034 Owner's Manual • • • • (V 2.0)
H/V
BRGT
Slct
Save
Load
Fact
Parameter Type
Display Orientation
Display Brightness
Parameter Type
Select Preset
Save Settings
Load Settings
Restore Factory Settings
Page 17 of 28
Advertisement
Table of Contents
