Network Settings Controls - Cobalt Digital Inc 9927-2StoH Product Manual

Operating Instructions
Table 3-1 9927-2StoH Function Menu List — continued
• Download Support zip Download/Save

Network Settings Controls

• Opening Fields for Editing
• Card IP Physical Port Select Control
• Card IP Setup Controls
9927-2STOH-OM (V1.0)
9927-2StoH Function Menu List and Descriptions
Provides utility to send engineering card data to Cobalt
Support (as a .zip file) to aid in troubleshooting or
special use cases needing assistance.
Allows download/save of .zip file for use by Cobalt engineering/support.
Note: File can be saved when and if desired with no limitations (card
operation is not affected during this process). However, transfer of
the file to Cobalt Support should follow normal channels of
soliciting Support to receive the file.
The Network Settings tab provides a dedicated Ethernet
connection to card control and monitoring via a rear
module Ethernet port. (This IP interface is entirely
independent and separate from the card's DashBoard
frame-based remote control/monitoring interface.)
• Modify Network Settings button opens dialog field for setting
network parameters.
• Apply button commits and applies the settings.
• Cancel button exits dialog with no changes committed.
Allows card dedicated IP interface (as set below) to use frame
communications or dedicated rear I/O module Ethernet RJ-45 port.
Note: • Frame net connection allows cards with per-card Ethernet
connection to connect with network via a shared frame Ethernet
port instead of per-card dedicated Ethernet connectors on the
card's rear module. Frame net connection is available only on
certain frame models.
• Card slot must be fitted with a rear I/O module equipped with an
Ethernet connector in order to use Rear I/O selection.
Provides controls for setting up card dedicated IP interface.
• Addressing Mode selsects either DHCP or static.
• Where Static is selected, standard IP fields allow entry of Address,
Subnet Mask, and Default Gateway.
• Where DHCP is selected, DNS Server address field is provided.
9927-2STOH PRODUCT MANUAL
3-21