Remote Control; Inserting The Battery - Clarion VRX653R Owner's Manual & Installation Manual

6. REMOTE CONTROL

Operating range: 30° in all directions
[ ], [ ]
[ MUTE ]
[ PS/AS ]

Inserting the Battery

1 Turn over the remote control unit and slide the cover in the
direction indicated by the arrow in the illustration.
2 Insert the battery (CR2025) into the insertion guides, with
the printed side (+) facing upwards.
3 Press the battery in the direction indicated by the arrow so
that it slides into the compartment.
4 Replace the cover and slide in until it clicks into place.
Notes:
Misuse may result in rupture of the battery, producing leakage
of fluid and resulting in personal injury or damage to
surrounding materials. Always follow these safety precautions:
• Use only the designated battery .
• When replacing the battery, insert properly, with +/– polarities
oriented correctly.
• Do not subject battery to heat, or dispose of in fire or water.
Do not attempt to disassemble the battery.
• Dispose of used batteries properly.
12
VRX653R
[ FNC ]
[ TA ]
When the panel is open
Signal transmitter
[ BND ]
[ ]
[ a ], [ d ]
[ DISP ]
[ PTY ]
[ AF ]
Insertion guide