Installing The Main Unit - Clarion VRX653R Owner's Manual & Installation Manual

5.

INSTALLING THE MAIN UNIT

I Universal Mount
1. Place the universal mounting bracket into
the instrument panel, use a screwdriver to
bend each stopper of the universal
mounting bracket inward, then secure the
stopper as shown in Figure 6.
2. Wire as shown in Section 8.
3. Insert the main unit into the universal
mounting bracket until it locks.
4. Mount the outer escutcheon so that all the
hooks are locked.
• Console opening dimensions
182 mm
Hole
Screwdriver
Outer escutcheon
Hole
Stoppers
Special Screw
Main unit
2-Spring
Note: Set the outer escutch-
eon so that its metallic
part on the back side
fits the upper edge of
the main unit.
Notes:
1) Some car models require special mounting
kits for proper installation. Consult your
Clarion dealer for details.
2) Fasten the front stopper securely to prevent
the main unit from coming loose.
Rear fastening hole (of vehicle)
Instrument panel
Rubber cap
Universal mounting bracket
Stoppers
47
VRX653R