Installing The Remote Control Battery - Clarion VTM1 Owner's Manual

Installing remote control battery
1. Pull out the battery holder.
Follow the arrow 1 slide it to the right toward the
battery while at the same time pull the battery
holder away from the remote control.
2. Place the battery.
Place the new lithium battery with the (+) side
up. (The type of battery: CR2025)
3. Push the holder back.
Using the finger to push in the holder back until
the locking sound is heard.
4. Aim the IR Remote Control directly at the
DVD player, then press any button to operate.

VTM1
Notes:
• Use the remote control only inside
the vehicle. Tinted windows will effect the signal
of the remote controls transmission.
• Useable range of the IR Remote Control is
approx. 3 meters.
• Direct sunlight or very bright light reduces
sensitivity of the remote control receiver. Be
sure the player is not located in direct sunlight.
• Any obstruction between the remote sensor
and remote control may disrupt reception.