Seek Tuning - Clarion VRX653R Owner's Manual & Installation Manual

TV Operations

Seek tuning

1. Press the BND button % and select the
desired TV band (TV1 or TV2).
∗ If "MANU" is lit in the display (or when the
panel is closed, if the indicator "SRCH" is not
lit), press and hold the BND button % for 1
second or longer. "MANU" in the display
goes off (or when the panel is closed, the
indicator "SRCH" lights) and seek tuning is
now available.
2. Press the right or left side of the SEARCH
button 2 to automatically seek a station.
Press the right side of the SEARCH button
2 to automatically tune up the frequency
band to the next available TV station; press
the left side to automatically tune down.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning. When you are in the step tuning
mode, the frequency changes one step at a
time. In quick tuning mode, you can quickly
tune the desired frequency.
1. Press the BND button % and select the
desired band. (TV1 or TV2)
∗ If "MANU" is not lit in the display (or when the
panel is closed, if the indicator "SRCH" is lit),
press and hold the BND button % for 1 second
or longer. "MANU" appears in the display (or
when the panel is closed, the indicator "SRCH"
goes off) and manual tuning is now available.
2. Tune into a station.
G Quick tuning:
Press and hold the right or left side of the
SEARCH button 2 for 1 second or longer to
tune in a station.
G Step tuning:
Press the right or left side of the SEARCH
button 2 to manually tune in a station.
Note:
• Manual tuning is cancelled if you do not operate
the unit for 7 seconds longer.
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your
favorite TV stations and store them in memory
for later recall.
1. Press the BND button % and select the
desired TV band. (TV1 or TV2)
2. To recall a stored TV station, press the
desired PRESET button # to select that
station.
30
VRX653R
∗ Press and hold one of the PRESET buttons
# for 2 seconds or longer to store the
current station into the preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the PRESET buttons
# for 2 seconds or longer to store the
current station to that preset memory.
Auto store
Auto store selects 6 TV stations automatically
and stores each one into a preset memory.
If there are not 6 stations with good reception,
stations previously stored in memory remain
and only the strong stations are stored into
memory.
1. Press the BND button % and select the
desired TV band. (TV1 or TV2)
2. Press and hold the PS/AS button 5 for 2
seconds or longer. The stations with good
reception are automatically stored to the
PRESET buttons # .
Preset scan
Preset scan allows the user to view each
preset position before it automatically
advances to the next preset. This function is
useful for searching for desired TV station in
memory.
1. Press the PS/AS button 5.
2. When the desired channel is received,
press the PS/AS button 5 again.
Switching the VTR system between
NTSC and PAL
∗ This function is enabled only when the panel is
open.
Switch to the VTR or DVD changer mode you
use.
1. Press the ADJ button * to switch to the
adjustment selection display.
2. Operate the JOYSTICK ¡ upward or
downward to move the cursor to "VTR N/P".
3. Operate the JOYSTICK ¡ rightward or
leftward to move the cursor to select
"NTSC" or "PAL".
4. Press the ENT at the center of the JOYSTICK
¡ to set the selected VTR or DVD changer
mode.