Table of Contents
Advertisement
Quick Links
Owner's manual & Installation manual
Mode d'emploi et manuel d'installation
Bedienungs- & Installationsanleitung
Manuale d'Istruzioni e d'Installazione
Gebruiksaanwijzing en installatie-aanwijzingen
Manual de instrucciones y de instalación
Bruksanvisning- och installations
Manual do proprietário e manual de instalação
VRX653R
6.5" MONITOR & RDS-EON FM/MW/LW RADIO WITH CD/
DVD CHANGER CONTROL
MONITEUR DE 6,5 POUCES ET RADIO FM/PO/GO RDS-
EON AVEC COMMANDE DE CHANGEUR
DE CD/DVD
6,5-ZOLL-MONITOR & RDS-EON UKW/MW/LW-RADIO
MIT CD/DVD-WECHSLERSTEUERUNG
MONITOR DA 6,5" E RADIO FM/MW/LW CON COMANDO
CAMBIA CD/DVD
6,5" MONITOR EN RDS-EON FM/MW/LW RADIO MET
AANSTURING VOOR CD/DVD-WISSELAAR
MONITOR DE 6,5-PULGADAS Y RADIO FM/MW/LW RDS-
EON CON MANDO PARA EL CAMBIADOR DE
CD/DVD
6,5-TUMS BILDSKÄRM MED RDS-EON FM/MV/LV-
RADIO OCH CD/DVD-VÄXLARSTYRNING
MONITOR DE 6,5 POLEGADAS E AUTO-RÁDIO RDS-EON
FM/MW/LW COM CONTROLO DO PERMUTADOR DE CD/
DVD
•
•
•
•
•
•
•
Advertisement
Chapters
Table of Contents
Related Manuals for Clarion VRX653R
Summary of Contents for Clarion VRX653R
-
Page 1: Precautions
Owner’s manual & Installation manual Mode d’emploi et manuel d’installation Bedienungs- & Installationsanleitung Manuale d’Istruzioni e d’Installazione Gebruiksaanwijzing en installatie-aanwijzingen Manual de instrucciones y de instalación Bruksanvisning- och installations Manual do proprietário e manual de instalação VRX653R 6.5” MONITOR & RDS-EON FM/MW/LW RADIO WITH CD/ DVD CHANGER CONTROL •... -
Page 2: Table Of Contents
Thank you for purchasing the Clarion VRX653R. ∗ This owner’s manual is for the VRX653R. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). -
Page 3: Controls
1. PRECAUTIONS 2. CAUTIONS ON HANDLING LCD panel/Generalities WARNING For your safety, the driver should not watch the TV or operate the controls while For a longer service life, be sure to read the following cautions. driving. Please note that watching and operating the TV while driving are prohibited by law in some countries. -
Page 4: Nomenclature
CONTROLS / COMMANDES / REGLER / CONTROLLI 4. NOMENCLATURE REGELAARS / CONTROLES / KONTROLLER / CONTROLOS Names of Buttons Main unit / Unité principale / Hauptgerät / Unità principale Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principale Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). -
Page 5: Joystick Operation
JOYSTICK Operation Notes: • Many settings/procedures have to be performed by using the JOYSTICK ¡ . Be sure to read this chapter in order to operate it properly. • In the DVD changer mode, items for menu display, etc. can be selected by operating the JOYSTICK ¡ upward, downward, leftward or rightward. -
Page 6: Mode Display
5. MODE DISPLAY The Color LCD Display and the Information Panel on the main unit show the following displays, provid- ing information about the mode and functions operated. Display common to each mode COLOR LCD DISPLAY INFORMATION PANEL MAIN Clock Time display TITLE LIST mode display COLOR LCD DISPLAY INFORMATION PANEL... -
Page 7: Radio Mode Display
RADIO mode display COLOR LCD DISPLAY INFORMATION PANEL MAIN RDS mode display COLOR LCD DISPLAY INFORMATION PANEL VRX653R... -
Page 8: Cd Changer Mode Display
CD Changer mode display COLOR LCD DISPLAY INFORMATION PANEL MAIN TV mode display COLOR LCD DISPLAY INFORMATION PANEL MAIN VRX653R... -
Page 9: Dab Mode Display
DAB mode display COLOR LCD DISPLAY INFORMATION PANEL DVD Changer mode display COLOR LCD DISPLAY INFORMATION PANEL While the car is moving, the screen below is MAIN displayed. AUDIO PROGRAM ONLY • No sub-indication VRX653R... -
Page 10: Remote Control
6. REMOTE CONTROL When the panel is open Operating range: 30° in all directions Signal transmitter [ FNC ] [ BND ] [ ], [ ] [ a ], [ d ] [ MUTE ] [ DISP ] [ TA ] [ PTY ] [ PS/AS ] [ AF ]... -
Page 11: Functions Of Remote Control Unit Buttons
Functions of Remote Control Unit Buttons Mode CD changer Radio (RDS) DVD changer Button [FNC] Switches among Radio, DAB, CD changer, DVD changer and TV. [BND] Switches reception Moves to the next disc in increasing order. Switches reception band. band. [w, z] Increases and decreases volume (in all modes). -
Page 12: Dcp
7. DCP The control panel can be detached to prevent 2. Lock the DCP/Operation Panel at the upper theft. When detaching the control panel, store it center until a click is heard. in the DCP (DETACHABLE CONTROL PANEL) POWER button case to prevent scratches. -
Page 13: Operations
8. OPERATIONS Note: Be sure to read this chapter referring to the front diagrams of Basic Operations chapter “3. CONTROLS” on page 5 (unfold). Adjusting the volume CAUTION Operate the VOLUME button 2 in the direction When the unit is turned on, starting and of the arrows w w (up) or z z (down) to adjust... -
Page 14: Showing A Mode Display
Basic Operations • If a title has been input, it is shown in the SUB When adjusting the angle of the display be display. If no title has been input, “---------” careful no to let your fingers get caught by appears in the display. -
Page 15: Adjusting The Bass And Treble
Basic Operations Adjusting the bass and treble When the panel is closed: Each time you press the Z-EHCR button 9, Notes: the tone effect changes in the following order: • This function is enabled only when the panel is open. “Z-EHCR 1”... -
Page 16: Radio Operations
Radio Operations Basic Operations Turning on/off the loudness Listening to the radio 1. Press the FNC button 1 and select the The loudness effect emphasizes the bass and treble to create a natural sound tone. When RADIO mode. The frequency or PS is you are listening to music at a low volume, it is displayed. -
Page 17: Manual Memory
Radio Operations ∗ When local seeking starts, “LO SEEK” Manual memory appears in the display. 1. Press the BND button % and select the desired band. (FM or AM (MW/LW)) Manual tuning 2. Select the desired station with seek tuning, There are 2 ways available: Quick tuning and manual tuning, or preset tuning. -
Page 18: Rds Operations
RDS Operations RDS (Radio Data System) 1. Press the ADJ button * to show the adjustment selection display. This unit has a built in RDS decoder system 2. Operate the JOYSTICK ¡ upward or that supports broadcast stations transmitting RDS data. This system can display the name downward to select “LINKACT”. -
Page 19: Selecting Pty
RDS Operations TA (Traffic Announcement) In TA standby mode, when a traffic This function enables you to listen to a announcement broadcast starts, the traffic broadcast of the selected programme type announcement broadcast is received as top when it starts, even if the unit operates on a priority regardless of the function mode so you function mode other than radio. - Page 20 RDS Operations ∗ If no station with the selected PTY broadcast Operating the PTY SELECT display can be received, the unit returns to the MAIN when the panel is open mode. 1. Press the PTY button 8 to select the PTY SELECT display.
-
Page 21: Cd Changer Operations
CD Changer Operations RDS Operations Switching the PTY display language CD changer functions Note: When an optional CD changer is connected • This function is enabled only when the panel is through the CeNET cable, this unit controls all open. CD changer functions. -
Page 22: Top Function
CD Changer Operations Fast-forward/Fast-backward When the panel is closed: G Fast-forward 1. Display the CD-text title (disc or track). 2. Press and hold the BND button % for 1 Press and hold the right side of the SEARCH second or longer. The titles scroll. button 2 for 1 second or longer. -
Page 23: Dvd Changer Operation
DVD Changer Operation CD Changer Operations Repeat play DVD changer functions When an optional DVD changer is connected The repeat play continuously plays the current through the CeNET cable. track. This function continues automatically until it is cancelled or the mode is changed. In this case, this unit only provides a part of the 1. - Page 24 DVD Changer Operation • Press the d button 2, and playback Switching to a next disc(Disc Up starts from the beginning of the next chap- function) ter. The disc up function plays from the first track • Press the a button 2, and playback (track No1) of the next disc.
-
Page 25: Watching A Video Cd
DVD Changer Operation Watching a video CD Scan playback This operation plays back all tracks on the disc, Showing the V-CD menu (for V-CD the first 10 seconds for each. discs with PBC (Play Back Control)) 1. Press the SCN button 5. This key does not function on some discs. - Page 26 DVD Changer Operation • Press the a button 2, and playback Fast forward and fast backward starts from the beginning of the current 1. Press and hold the right or left side of the track. SEARCH button 2 during playback. When this button is pressed again within Press and hold the button, and the playback about 2 seconds, playback starts from the...
-
Page 27: Tv Operations
TV Operations DVD Changer Operation TV functions Track random playback This operation plays the file in the folder in ran- When an optional TV tuner is connected through dom order. the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner. 1. -
Page 28: Seek Tuning
TV Operations ∗ Press and hold one of the PRESET buttons Seek tuning # for 2 seconds or longer to store the 1. Press the BND button % and select the current station into the preset memory. desired TV band (TV1 or TV2). ∗... -
Page 29: Setting The Tv Area
TV Operations Setting the TV area Adjusting the brightness and tone of color ∗ This function is enabled only when the panel is open. Notes: When you select the TV area (TV reception • This operation is available only when the car is area), the TV tuner area setting changes. -
Page 30: Digital Radio/Dab Operations
Digital Radio/DAB TV Operations Operations Changing over TV display size ∗ This function is available only when the panel is About DAB programmes open. The Digital Audio Broadcasting (hereinafter 1. Press the DISP button @ for 1 second or referred to as “DAB”) system transmits several longer to display playback information such programmes on one frequency simultaneously, as screen size. - Page 31 Digital Radio/DAB Operations Manual tuning Switching programmes 1. Press the FNC button 1 to select DAB 1. Press the FNC button 1 to receive a DAB mode. station. 2. Press and hold the BND button % for 1 2. Select right or left to switch programmes in a DAB station using the SEARCH button 2.
- Page 32 Digital Radio/DAB Operations ∗ This function can only be used when “TP” is lit in Information select the display. When “TP” is lit, this means that the This function allows selecting a type of RDS broadcast station being received has traffic INFORMATION on INFORMATION interrupt announcement programmes.
- Page 33 Digital Radio/DAB Operations ∗ Below are the factory default settings stored channel memory. for PRESET buttons #. PTY item PTY item Preset ENGLISH Contents number ENGLISH Contents NEWS News NEWS News AFFAIRS Today’s events INFO Information INFO Information POP M Pop music SPORT Sports...
-
Page 34: Dynamic Label Function
Digital Radio/DAB Operations Dynamic Label Function 3. When “PTY ITEM” is selected, PTY selection is carried out. Operate the A dynamic label (hereinafter referred to as JOYSTICK ¡ upward or downward to “DLS”) is a text data associated with each DAB select a desired PTY. -
Page 35: Navi Operations
2. Operate the JOYSTICK ¡ upward or downward to select “INPUT”. A menu bar is shown to the right to select the following items: G “NAVI”: Setting when Clarion NAVI (NAX9500E, NAX943DV) is connected; G “CCD”: Setting when Clarion CCD camera is connected to this unit;... -
Page 36: Ccd Camera
Setting CCD as an external input items: equipment G “NAVI”: Setting when Clarion NAVI is Be sure to perform this setting after connecting connected; the CCD. G “CCD”: Setting when Clarion CCD ∗... -
Page 37: Other Functions
Other Functions 3. If you press and hold the TITLE button ( Always turning on the button illumination on the operation panel for 1 second or longer, the display switches to the title input mode display. Note: 4. Operate the JOYSTICK ¡ upward or •... - Page 38 Other Functions 3. Press the TITLE button ( again to return to Setting the car speaker output for the STANDARD display. the cellular phone ∗ The factory default setting is “RIGHT”. Cellular phone interrupt setting ∗ To output the telephone calls, set the cellular phone interrupt to ON.
-
Page 39: In Case Of Difficulty
9. IN CASE OF DIFFICULTY Problem Cause Measure Replace with a fuse of the same amperage. If the Power does not Fuse is blown. fuse blows again, consult your store of purchase. turn on. (No sound is Consult your store of purchase. produced.) Incorrect wiring. - Page 40 Problem Cause Measure When the TV tuner Bad receiving condition A radio wave may not reach sufficiently due to is connected, the obstruction of mountains or buildings. Check it again image gets at a place where a radio wave can be received unclear.
-
Page 41: Error Displays
10. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described to eliminate the problem. Cause Error Display Measure ERROR 2 A CD is caught inside the CD deck and is This is a failure of CD deck’s mechanism not ejected. -
Page 42: Specifications
11. SPECIFICATIONS FM (UKW) Tuner General Frequency range: Power source voltage: 87.5 MHz to 108 MHz (0.05 MHz steps) 14.4 V DC (10.8 to 15.6 V allowable) Ground: Negative AM Tuner Current consumption: Frequency range: 4.0 A (1 W) MW: 531 kHz to 1602 kHz (9 kHz steps) Auto Antenna Rated Current: LW: 153 kHz to 279 kHz (3 kHz steps) 500 mA less... -
Page 43: Before Starting
VRX653R Installation and Wire connection manual I Contents 1. BEFORE STARTING ..............45 2. PACKAGE CONTENTS ............45 3. GENERAL CAUTIONS ............46 4. CAUTIONS ON INSTALLATION ..........46 5. INSTALLING THE MAIN UNIT ..........47 6. REMOVING THE MAIN UNIT ..........49 7. -
Page 44: General Cautions
For tough dirt, apply a little consult your dealer or an authorized cold or warm water to a soft cloth and wipe CLARION service centre. off the dirt gently. CAUTIONS ON INSTALLATION 1. Prepare all articles necessary for installing the main unit before starting. -
Page 45: Installing The Main Unit
1) Some car models require special mounting mounting bracket until it locks. kits for proper installation. Consult your Clarion dealer for details. 4. Mount the outer escutcheon so that all the 2) Fasten the front stopper securely to prevent hooks are locked. - Page 46 I Fixed Mount (TOYOTA, NISSAN and other ISO/DIN equipped vehicles) This unit is designed for fixed installation in the Repeat the same for the other side to dashboard. remove the springs from the both sides. (Figure 7) If the vehicle is equipped with a factory- installed radio, install the main unit with the 2.
-
Page 47: Removing The Main Unit
REMOVING THE MAIN UNIT of the spring into hole of the hook 1. When the rear of the main unit has been plate, then pull the main unit out by the secured with the method shown in Figure 6 hook plate. (Insert both the right and left unfasten the special screw. -
Page 48: Wire Connection
WIRE CONNECTION Rear view of the Main unit ∗5 Front right Gray Gray White ∗5 Front left ∗4 Rear right Brack White Brack Rear left ∗1 ∗3 ∗2 ∗2 Description Description REAR RIGHT - NAVI/CCD terminal REAR RIGHT + RGB INPUT FRONT RIGHT - VIDEO INPUT (for TV tuner) FRONT RIGHT +... - Page 49 (CCD/NAVI) and the RGB terminal of the main unit. For detailed information, refer to the operating instructions provided with car navigation equipment. When the NAVI is connected, the CCD camera cannot be connected. When the Clarion NAVI is to be connected, set the INPUT to the NAVI position.
-
Page 50: Sample Systems
SAMPLE SYSTEMS I Sample System 1 Main Unit Amp remote RCA PIN cable Front (Sold separately) Speakers Amp. Rear Speakers DVD/etc. INPUT VIDEO INPUT RCA video cable Mini DIN(8P) Cable (included the VCZ628) (included the CeNET cable NAX943DV) (included the TV tuner) RCA video cable (included the TV tuner) RGB cable... - Page 51 I Sample System 2 Main Unit Amp remote (VRX653R) RCA PIN cable Front (Sold separately) Speakers Amp. Rear Speakers DVD/etc. INPUT VIDEO INPUT RCA video cable (included the VCZ628) Mini DIN(8P) Cable (included the CeNET cable RCA video cable NAX943DV) (included the (included TV tuner)
- Page 52 I Sample System 3 Main Unit Amp remote (VRX653R) RCA PIN cable Front (Sold separately) Speakers Amp. Rear Speakers VIDEO INPUT DVD/etc. INPUT CeNET cable (included the TV tuner) RCA video cable (included the TV tuner) Mini DIN(8P) Cable (included the TV Tuner CCD camera) (TTX7502z/...
- Page 53 Clarion Co., Ltd. All Rights Reserved. Copyright © 2004: Clarion Co., Ltd. QC-6711E Printed in China / Imprimé en Chine / Gedruckt in China / Stampato in Cina 2004/12 (A·C) 280-8165-00 Gedrukt in China / Impreso en China / Tryckt i Kina /...
Need help?
Do you have a question about the VRX653R and is the answer not in the manual?
Questions and answers