Table of Contents
Advertisement
FEATURES (continued)
Photo Input Function
With this Photo Input function, you can enjoy watching Photos from such devices as
Digital Still Camera and SD card along with useful features such as Slide Show.
Operating the Photo Input
1. Before operating this function, make sure to turn the power OFF /Standby.
2. Prepare the DSC (Digital Still Camera) / USB card reader/ SD card or MMC as
follows.
Digital Still Camera
: Set up with reference to the content about
USB Card Reader
: Insert memory cards into reader.
SD Card / MMC
: Ensure the card is inserted in the correct direction as
3. Connect the USB cable to the input terminal, or insert the SD card /MMC into the
slot as shown.
4. Turn ON the TV after the USB cable is connected or the SD card / MMC is inserted.
5. Press
button on the remote control to activate Photo Input mode.
(Then, turn ON the DSC. Refer to the user's manual of your DSC for the timing.)
6. Each time
button is pressed, you can switch the mode as follows.
Photo
Make sure to turn the power OFF/Standby when disconnecting the DSC / USB
card reader / SD card or MMC from the set.
NOTE
• Do not insert SD Card/MMC and USB cable at the same time.
• Do not insert anything other than SD Card/MMC into the slot. It could cause malfunction or damage to the slot.
Do not allow children to play around the slot.
• SDHC Memory card is not available.
"connecting to PC" in the user's manual of DSC.
indicated near the slot.
Normal Screen
Photo Input
button
USB Cable
SD Card/
MMC
Digital Camera
USB Card reader
65
Advertisement
Table of Contents
