Table of Contents
Advertisement
BASIC OPERATION
Power On/Off
Now, turn On the main power to the unit. Make sure that the power cord is
plugged into the wall socket.
To turn On the power of the unit:
1. Press the Main Power switch on the unit.
The Indicating Lamp will illuminates in Red (Standby mode).
2. Press Sub Power button either on the control panel or on the remote control.
• The colour of the Indicating Lamp turns into Blue, and the image will be
displayed on the screen.
To turn Off the power of the unit:
1. Press Sub Power button either on the control panel or on the remote control.
• The image disappears from the screen and the Indicating Lamp turns into
Red (Standby mode).
2. Press Main Power switch to completely turn Off the power of the unit.
Indicating Lamp
Status
Off
Red
*1
Blue
Pulsing Blue
*3
Orange
Green
*1 After turning on, the indicating lamp pulses for an instant and then starts lighting. Also, the indicating lamp blinks
whilst using remote control.
In case you do not want it to pulse/blink, select "Off" in "LED Mode" from Confi guration menu. Refer to
the details.
*2 About Power Save mode, see "Power Save Mode" and "When Following Messages Appear on the Screen" on
and
74
for details.
*3 The indicating lamp blinks in orange if the View Timer setting does not have time information.
NOTE
• If the image does not appear on the screen at all, or have any problem, see TROUBLESHOOTING on
It may help you to solve the problems.
• After turning On, it takes several tens of seconds until TV starts up. If selecting "On" in "Quick Start Options" from
Confi guration menu, you can shorten the processing time. Refer to
• You can turn On the power only by pressing the Sub Power button during Standby mode.
• Do not switch the power On/Off repeatedly in a short period of time. It could cause malfunction.
• If the power outage occurs whilst using the unit, turn Off the Main Power switch before you leave to avoid sudden
power surges when power comes back.
The Indicating Lamp Status Check
Power Status
Off
Standby mode
On
Power Save mode
*2
—
—
Power Switch Status
Main power
Off
Main power
On
Sub power
Off
Main power
On
Sub power
On
Main power
On
Sub power
On
—
—
34
.
Main Power switch
(located on the bottom
surface)
Sub Power
button
Sub Power button
View Timer Status
—
—
—
—
Whilst TV has View Timer
set up.
Whilst operating a
programme which has set
up View Timer.
for
34
74
76
~
72
.
23
Advertisement
Table of Contents
