Hitachi L37VP01 Instructions For Use Manual

Hitachi L37VP01 Instructions For Use Manual

37" digital lcd colour television

Advertisement

Quick Links

37" Digital LCD Colour Television
L37VP01U

Advertisement

Table of Contents
loading

Summary of Contents for Hitachi L37VP01

  • Page 1 37" Digital LCD Colour Television L37VP01U...
  • Page 2 Contents Colour Temp ..........22 Safety Precautions ..........3 Noise Reduction ........22 IMPORTANT SAFETY INFORMATION ON Film Mode ..........22 OPERATING YOUR TV ........3 Store ............22 DO’s ............3 Reset ............22 DON’Ts ............3 Sound Menu ..........22 1.Power Source ..........
  • Page 3 Other Features ..........27 TV Status ............27 Mute Indicator ..........27 PIP and PAP modes ........27 PAT ............27 AV Modes ............27 Freeze Picture ..........27 Zoom Modes ..........27 Teletext .............. 28 Connect Peripheral Equipment ....29 High Definition ..........
  • Page 4: Safety Precautions

    DON’Ts Safety Precautions DON’T continue to operate the equipment if you Please read the following recommended safety pre- are in any doubt about it working normally, or if it cautions carefully for your safety. is damaged in any way switch off, withdraw the IMPORTANT SAFETY INFORMATION ON mains plug and consult your dealer.
  • Page 5 1.Power Source stitutions may result in fire, electrical shock, or other hazards. The TV set should be operated only from a 220-240 V 9. Servicing AC, 50 Hz outlet. Ensure that you select the correct voltage setting for your convenience. Please refer all servicing to qualified personnel.
  • Page 6: Disconnect Device

    11. Disconnect Device The mains plug is used to disconnect TV set from the mains and therefore it shall remain readily operable. Excessive sound pressure from earphones and headphones can cause hearing loss. To prevent injury, this device must be securely attached to the wall in accordance with the installa- tion instructions when mounted to the wall (if the option is available).
  • Page 7 Features • Remote controlled colour LCD TV. • Fully integrated Digital TV (DVB-T) • Full HD (1920x1080) • 100 programmes from VHF, UHF bands or cable channels can be preset. Phono L+R to 3.5mm Jack Audio Cable. • It can tune cable channels. •...
  • Page 8: Lcd Tv Front View

    LCD TV Front View Rear View and Peripheral Connections & ( ) * Aerial Headphone Audio Line Out Audio Inputs For service use only Component Audio Inputs Power On/Off Switch Video Input Component Video (YPbPr) Inputs S-VHS Input For service use only Power Cord Input HDMI Inputs VGA Input...
  • Page 9: Remote Control Buttons

    = Picture mode / INPUT = INPUT For source selection, first press INPUT button on the remote controller then source button which you want to switch. ** These buttons can control most Hitachi DVD Players and Recorders. English - 8 -...
  • Page 10: Installation Of The Tft Tv To The Wall

    4. To avoid potential injury it is advisable to have assistance from another person to carry out this installation. 5. Hitachi assumes absolutely no responsibility for injuries or damages that may occur due to improper installation and handling.
  • Page 11 “Attention: Only the original wall bracket should be used with this product” English - 10 -...
  • Page 12: Before Switching On Your Tv

    Handling the Remote Control Preparation • It could cause corrosion or battery leakage and may For ventilation, leave a space of at least 10 cm free all result in physical injury and/or property damage in- around the set. To prevent any fault and unsafe situ- cluding fire.
  • Page 13: Switching The Tv On/Off

    Switching The TV ON/OFF Initial Settings To switch the TV on: When the TV is turned on for the first time, IDTV is on first. Because this is the first time that IDTV has been Your TV will switch on in two steps: used, there are no channels stored in the memory.
  • Page 14: Everyday Operation

    After Automatic Search process is completed, the name and times of the programme are not available then following message asking for analogue channel search “No Information Available” is displayed in the information appears on the screen. TV switches to the analogue banner.
  • Page 15: Idtv Menu System

    then you will be asked for switching to that channel IDTV Menu System when the reminder time is reached. The IDTV Menu can only be shown when watching Digital terrestrial broadcasting. Press the TV/DTT but- ton to turn the IDTV on while TV is in the analogue mode.
  • Page 16 Navigating the whole channel list • Press keys for selecting the previous or next channel. • You can press buttons to move page up or page down. • To watch a specific channel, highlight it using buttons and then press OK button, while the “Select”...
  • Page 17 Press the button to cancel the editing or OK button to save the new name. Adding locks to channels Channel Locking provides a password-protected ac- cess to channels selected by parents. In order to lock a channel you should know the Paren- tal Lock password (default value is set to 0000 in the factory and can only be changed from the Configu- ration Menu).
  • Page 18: Installation

    Hint: Entering More item pressing button gets Highlight “Yes” and press OK button to searh for quick and easy use of the all menus in IDTV analogue channels.The following menu appears on displaying information for the highligted menu the screen for analogue channel search. item.
  • Page 19 Manual Search: In Manual Search, the number of the multiplex is entered manually and only that multiplex is searched for the channels. For every valid channel number, signal level, signal quality and network name are shown at the bottom of the screen. In both manual and auto search any existing channel in the database is not re-stored to avoid redundant duplicates of that channel.
  • Page 20: Language Settings

    Audio Language Digital terrestrial television channels can broadcast simultaneous sountracks in more than one language. This function selects which language soundtrack you will hear when switching to a channel broadcasting with the multiple soundtracks. buttons to cycle through the language options.
  • Page 21 Maturity Lock: Use or buttons to set Maturity Lock to the “Off, Age 4, Age 5...Age17 or Age 18”. (“Off, Age 4, Age 5,..., Age 18, above 6 years, Universal viewing (FRA) or X-rated ESP”.) Menu Lock: There you can set/reset locking for the Main Menu or the Installation Menu to restrict access.
  • Page 22: Common Interface

    Setup”. Press OK button to display TV Setup menu screen. 0DLQ 0HQX • To set an event, highlight its mode button using buttons and press OK button to display the timer Detailed information for all menu items is in Analogue entry window.
  • Page 23: Menu System

    Reset Menu System By pressing button, select Reset. Press Picture Menu or OK button to reset the picture modes to factory default settings. Sound Menu Mode By pressing button, select Mode. Press button to choose from one of these options: Cinema, Dynamic and Natural.
  • Page 24: Feature Menu

    balance Feature Menu By pressing button, select Balance. Press button to increase balance to the right. Press button to decrease balance to the left. Balance level can be adjusted between -32 and +32. Press the button to return to the previous menu. Sound Mode By pressing select Sound Mode.
  • Page 25: Install Menu

    Default Zoom Colour System By pressing button, select Default Zoom. By pressing button, select Colour System. You can set Default Zoom to Full, Panoramic, 4:3 Press button to change the colour system to or 14:9 Zoom by pressing button. PAL, SECAM or AUTO. Blue Background If Sound System is set to I, SECAM is not available for the Colour System.
  • Page 26: Colour System

    By moving the cursor in four directions you can reach 20 programmes in the same page. You can scroll the pages up or down by pressing the navigation buttons to see all the programmes in TV mode (except the AV mode).
  • Page 27: Source Menu

    Source menu By pressing button, select the sixth icon and press or OK button. Source menu appears on the screen. Autoposition If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically.
  • Page 28: Other Features

    Other Features • While the PAP function is off, pressing twice will switch the TV to PAT mode. TV Status AV Modes Programme Number, Programme Name, You can switch your TV to AV modes by using re- Sound Indicator and Zoom Mode are displayed lated buttons on the remote control.
  • Page 29 Full: Teletext This uniformly stretches the left and right sides of a Teletext system transmits informartion such as news, normal picture (4:3 aspect ratio) to fill the wide TV sports and weather on your TV. Note that if the signal screen.
  • Page 30: Connect Peripheral Equipment

    • Select AV-2 Out by pressing button. Connect Peripheral Equipment • For copying the picture that comes from the tuner, High Definition select AV-1. Your LCD Television is capable of displaying High Defi- Camera And Camcorder nition pictures from devices such as a High Definition To Connect To AV Input Satellite Receiver or DVD Player.
  • Page 31: Care Of The Screen

    Tips Care Of The Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer. Poor Picture Have you selected the correct TV system? Is your TV set or house aerial located too close to non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pic-...
  • Page 32 Peripheral Equipment Connections Aerial Connection English - 31 -...
  • Page 33: Specifications

    Specifications English - 32 -...
  • Page 34 Specifications English - 33 -...
  • Page 35: S-Input Connector Pin Specifications

    Specifications Signal Input PC RGB Terminal (D-sub 15-pin connector) • When different kinds of input signals are simul- taneously input to the monitor via a graphics board or the like, the monitor will automatically select the signals in the following priority order: •...
  • Page 36: Appendix A: Pc Input Typical Display Modes

    Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1360 x 768, frequency range of 56-85 Hz. The following table is an illustration of some of the typical video display modes. 0 RGH 5HVROXWLRQ )UHTXHQF\ +RUL]RQWDO 9HUWLFDO +RU N+] 9HU +] ...
  • Page 37: Appendix B: Av And Hdmi Signal Compatibility

    Appendix B: AV and HDMI Signal Compatibility 6RXUFH 6XSSRUWHG 6LJQDOV $YDLODEOH 3$/  $9 176&  6&$57  5*%  5*%  3$/  $9 176&  6&$57 69+6  69+6  , +] 3 +] , +] $9 3 +] <3E3U 3...
  • Page 38: Appendix C: Main And Pip-Pap Picture Combinations

    Appendix C: Main and PIP-PAP Picture Combinations Addendum to the instruction book. The following is a key to the AV inputs: Inputs can be selected by either using the appropriate buttons on the remote control or by selecting an input on the source menu.
  • Page 39: Your Guarantee Of Excellence

    12 months of the date of purchase provided that: i) The product has been installed and used only in accordance with the instructions supplied with the product ii) The product has not been repaired, maintained, or modified by any person other than an Hitachi authorised engineer...
  • Page 44 Hitachi, Ltd. Consumer Business Group Shin-Otemachi Bldg 5f, 2-1, Otemachi 2-Chome, Chiyoda-Ku, Tokyo 100-0004 Japan HITACHI EUROPE LTD. HITACHI EUROPE S.A. Consumer Affairs Department 364, Kifissias Ave. & 1, Delfon Str. PO Box 3007 152 33 Chalandri Maidenhead Athens Berkshire SL6 8ZE...

This manual is also suitable for:

L37vp01u

Table of Contents