BASIC OPERATION (continued)
Input Switching to DTT/TV/AV1~5/HDMI1~3/RGB
There are several ways to change the input mode as mentioned below.
Please select your preferred way.
You can select DTT and TV mode directly.
Press
button on the remote control. Each time the button is pressed,
the mode is switched between DTT and TV mode.
Display Input Switching Banner to select the input mode.
1. Press
button on the remote control or Input Select button on
the control panel to display Input Switching Banner.
2. Select the input mode.
Each time
button on the remote control or Input Select button
on the control panel is pressed, the screen displays the
corresponding mode by following order.
DTT
RGB
HDMI 3
Also, you can change the input mode back and forth by using
button on the remote control or Volume Up/Down button on the
control panel.
Input Mode buttons (AV1~AV5, HDMI 1~3 and RGB mode)
After pressing
button, press the desired Input Mode button on the
remote control.
TV
AV1
AV2
AV3
HDMI 2
HDMI 1
AV4
AV5
◄►
AV1
AV
Composite
Input
AV1
Input Select button
Input Mode
button
Volume Down button
Volume Up button
Input Select button
27