Table of Contents
Advertisement
FUNCTION MENU OPERATION
Basic Mode
This can access to various kinds of useful features, such as EPG and
FUNCTION
timers. If you press
following menu appears.
Selected Items
Favourite
Programme
Search
Off Timer
On Timer
Timers
Auto Clock
Time Offset
44
button on remote control at normal mode, the
Channel Category
Programme Type
Date
Programme Timers
--min.
30min.
60min.
90min.
120min.
--h--m
DTT
Teletext
Off*
Teletext Position
Date
Time
-3~+3
Function Menu
Favourite
Programme Search
Timers
Lock & Rating
Common Interface
Zoom
Stop Timer Event
Setup hint
This gives access to Favourites page which allows you to set
a channel as Favourite. See
You can search for programmes.
When you select "Programme Search" and press
Condition screen is displayed.
Select a search condition (Category / Programme Type / Date) by using
button, and select the value of each items by using
After setting the search condition, select
In case that time is not acquired from DTT broadcast, or no
channel is stored in DTT channel list, this is not available.
(This is available only in DTT mode.)
This reminds you that the desired programme is about to
start even whilst you are watching another channel. This
is available only if TV obtains the current time information
from DTT broadcasting.
See
53
for the detailed.
This function automatically sets the power to Standby
mode when the selected time period has elapsed.
This function automatically sets the power from standby
mode to On when the specifi ed time period has elapsed.
Input the desired time within the range of 00h01m to
11h59m by using
button on the remote control.
Select if the date and time information is acquired
automatically.
DTT: The date and time information can be acquired from
DTT signal automatically.
Teletext: The date and time information can be acquired
from analogue Teletext automatically only when
the channel number selected at "Teletext
Position" is selected.
Off: Set the current date and time at "Date" and "Time" menu.
When using the date and time information acquired from
analogue Teletext, select one of the channel numbers
which corresponds to analogue Teletext with
You can set the current date and time manually here
when "Off" is selected at "Auto Clock". When "DTT" or
"Teletext" is selected at "Auto Clock", the current date and
time acquired automatically are displayed.
If the time information in Programme Information, Electronic
Programme Guide (EPG), or the current time is incorrect,
the correct time can be set in 1-hour steps.
It cannot be changed if you do not have time information.
to set as favourite channels.
55
button, Search
OK
◄►
Search
.
button.
◄►
button.
Advertisement
Table of Contents
