Picture Menu (Photo Mode) - Hitachi L37X01U User Manual

MAIN MENU OPERATION (continued)

Picture Menu (Photo mode)

In this menu, you can make specifi c adjustments for the picture of photo mode based on your preference.
By pressing button at the bottom of each menu page, the next Picture menu page will appear on the screen.
The menu items indicated by * can be automatically stored.
Picture 1/3
Natural
Picture Mode
Contrast 50%
Brightness 50%
Colour 50%
Hue 100%
Sharpness 50%
Colour Temperature Cool
Normal
Contrast Mode
YNR Off
CNR
Off
Reset
Select Adjust Return
Selected Items
Picture Mode*
Contrast*
Brightness*
Colour*
Hue*
Sharpness*
Colour Temperature*
Contrast Mode*
YNR*
CNR*
Reset
40
1010 Picture
Picture Mode
LTI
CTI
Black Enhancement
Back Light
Select
Dynamic
Natural
Cinema
0
(101 110%)
0
0
0
0
Normal
Black/White
Dynamic
Normal
2/3 1010
Natural
Low
High
Low
50%
Reset
Adjust Return
You can make the best selection from 3 modes depending
on the lighting condition and intended use.
Dynamic: Suitable for the brighter conditions.
Natural : Suitable for the normal lighting condition.
Cinema : Suitable for watching movie.
This adjusts the contrast to meet the lighting environment
by using button.
◄►
The maximum value can be extended to [110%] by
100%
pressing and holding
This is the special feature prepared for the dark scenes.
At the normal condition, it is recommended to set the
value less than [100%].
Adjust according to personal preference by using
100%
button.
Adjust according to personal preference by using
100%
button.
Pressing button enhances red and weakens green,
whilst pressing
100%
green. The setup hint is adjusting for the realistic skin
colour.
Preferred sharpness can be adjusted by pressing
100%
button for softer image or
Cool
You can select from 4 settings (default) depending on the
Warm colour condition with
It allows you to choose from 2 modes.
Dynamic: Sharpen the gradation to improve the contrast
feeling.
Normal: Reproduce as faithful gradation as possible.
Off
Low This is a noise reduction system for picture signal.
High
Off
Low This is a noise reduction system for colour signal.
High
Each item on this menu screen can be restored to the
original factory settings by pressing
Picture 3/3
Colour Management
Colour Temp. Adjust
Select Enter Return
Setup hint
button at [100%].
button weakens red and enhances
button for sharper image.
button.
◄►
button.
OK
1010
◄►
◄►