Photo Input Function - Hitachi 32LD9700U User Manual

FUNCTION (continued)

Photo Input Function

With this Photo Input function, you can enjoy watching Photos from such devices as
Digital Still Camera and SD card along with useful features such as Slide Show with
Background Music and Movie picture.
Operating the Photo Input
1. Before operating this function, make sure to turn the power OFF /Standby.
2. Prepare the DSC (Digital Still Camera) / USB card reader/ SD card or MMC as follows.
Digital Still Camera : Set up with reference to the content about
USB Card Reader : Insert only one memory card.
SD Card / MMC : Ensure the card is inserted in the correct direction as
3. Connect the USB cable to the input terminal as shown (Right side), or insert the
SD card /MMC into the slot (Left side).
4. Turn ON the TV after the USB cable is connected or the SD card / MMC is inserted.
5. Press
button on the remote control to activate Photo Input mode.
(Then, turn ON the DSC. Refer to the user's manual of your DSC for the timing.)
6. Each time
button is pressed, you can switch the mode as follows.
Photo Movie
Make sure to turn the power OFF/Standby when disconnecting the DSC / USB
card reader / SD card or MMC from the set.
Left Side
SD Card/MMC
SD MEMORY
CARD
PUSH-EJECT
P
P
OK
PH35814
NOTE
Do not insert SD Card/MMC and USB cable at the same time.
Do not insert anything other than SD Card/MMC into the slot. It could cause malfuction or damage to the slot.
Do not allow children to play around the slot.
"connecting to PC" in the user's manual of DSC.
indicated near the slot.
Normal Screen
Rear Panel (Left side and Right side)
Photo Input
Right Side
USB cable
CLE-978
button
Digital Camera
USB Card Reader
61