Auto Clock Setting Using Pdc Signal - Hitachi VT-MX935EUK Instruction Manual

AUTO CLOCK SETTING USING PDC SIGNAL

This function engages when "AUTO clock
this function, specify "AUTO clock – (off)".
To switch auto clock setting between on and off
Controls
1
2
3
Cursor
1 2 3
MENU
4 5 6
7 8 9
4
0
Notes:
• If the PDC signal being broadcast by a station does not contain a time signal, the VCR's clock will not be
set automatically by pre-tuning the VCR to the channel. In this case, use the procedure on page 20 to
set the clock manually.
• The time which has been set automatically may drift from the correct time depending on the signal
condition or the programme being broadcast. In this case, use the procedure on page 20 to set the
VCR's clock manually.
• If the VCR's clock has already been set manually, the function to set the clock using a PDC signal is
disabled automatically.
(on)" is specified on the VCR MODE setting screen. To release
TV Screen
Turn the VCR and TV on, and then set the TV to
the video programme number.
Press the MENU button. Press the
V C R MODE
button to select MODE, and then press the ENTER
O SD –
V I D E O L I N K 1 L L 2
button.
T A P E A N A L YZER –
PROGRAM PLAY
–
AUTO –
Exit
SELECT SET MENU
Press the
V C R MODE
O SD –
V I D E O L I N K 1 L L 2
T A P E A N A L Y ZER –
PROGRAM PLAY –
AUTO –
Exit
SELECT SET MENU
Press the
V C R MODE
clock setting function between
O SD –
V I D E O L I N K 1 L L 2
T A P E A N A L Y ZER –
PROGRAM PLAY
–
AUTO –
Exit
SELECT SET MENU
cursor button to select AUTO
or cursor button to switch the auto
(on) and – (off).
cursor
.
19