Hitachi VT-MX935EUK Instruction Manual page 25

Controls VCR Display
TRACKING
PLAY
SLOW
1 2 3
4 5 6
7 8 9
0
Notes:
• If there is a noise bar in the picture during still
or slow motion play, press the SLOW button
and then press the TRACKING
until the noise is reduced.
• To prevent tape damage, the VCR will switch
from the still/slow mode to the stop mode after
about 1 minute.
Auto Tracking
When you insert a tape that has not been recorded
by this VCR, auto tracking operates automatically.
If you want to do auto tracking again, press the
PLAY button on the remote control during
playback.
• Auto tracking may not operate when a tape
recorded on this VCR is inserted.
• Auto tracking may not operate correctly when
the tape is scratched or the recorded condition
is poor. In this case, press the TRACKING
button ( or ) to adjust tracking manually.
/ button
25