Hitachi VT-MX935EUK Instruction Manual page 74

Auto Install
VCR
7
400x DRIVE
PROG
8
REC
400x DRIVE
PROG
9
LINK
400x DRIVE
Safety Tab
IMPORTANT:
Insert the cassette into the VCR. Push the cassette until the machine carries the cassette in itself.
Never force a cassette in as this may damage the mechanism.
TV screen
STOP PLAY/STILL
REC /REW F.FWD/
TAPE
NAVIGATION
STOP PLAY/STILL
/REW F.FWD/
TAPE
NAVIGATION
STOP PLAY
REC /REW F.FW
PROG
If the VCR display "
on the VCR or on the remote control. The RF
channel data will appear on the VCR display. Press
the PROG or
channel to "
the STOP button on the VCR or on the remote
control again.
Press the PLAY/STILL button, the test pattern will
disappear and the VCR will now come out of the
standby mode into the operate mode.
You should now be able to playback a prerecorded
cassette.
Insert the cassette carefully (as shown). If the safety
tab is removed
immediately, if not press the PLAY/STILL button
and the picture will appear on the screen.
– 4 –
" press the STOP button
button to change the RF
". To stop the RF output, press
then playback will start