Configuration Examples - Cisco Octal-Port DMT ATU-C Line Card Information Manual

Octal-Port DMT ATU-C Line Card

Configuration Examples

The following example shows a profile named 8xDMT2 being created. The profile uses the default
profile values for any parameters not specified.
Current configuration : 7019 bytes
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname DSLAM
!
boot system flash:ni2-dsl-mz.121-6.DA.bin
slot 1 ATUC-4FLEXIDMT
slot 2 ATUC-1-DMT8
slot 3 ATUC-4FLEXIDMT
slot 4 ATUC-4FLEXIDMT
slot 5 ATUC-4FLEXIDMT
slot 6 ATUC-4FLEXIDMT
enable password cisco
!
!
!
!
!
!
dsl-profile default
dmt bitrate maximum interleaved downstream 8032 upstream 864
cap bitrate maximum downstream 7168 upstream 1088
!
dsl-profile 8xdmt
!
dsl-profile 8xDMT2
dmt overhead-framing mode1
dmt check-bytes fast downstream 12 upstream 6
dmt margin downstream 12 upstream 6
dmt bitrate maximum fast downstream 3200 upstream 640
dmt bitrate maximum interleaved downstream 0 upstream 0
network-clock-select 1 system
ip subnet-zero
ip host-routing
no ip finger
Configuration Examples
Cisco IOS Release 12.1(6)DA
9