Cisco Octal-Port DMT ATU-C Line Card Information Manual page 14

dmt bitrate
Table 2 Allowable Ranges and Default Values for DMT Bit Rates
Configuration Data
Parameter Path
DMT bit rate max Fast
DMT bit rate min Fast
DMT bit rate max Interleaved
DMT bit rate min Interleaved
Caution This command causes the port to retrain when you change the value of the bit rate parameter.
Setting a parameter to its current value does not cause a retrain. If a port is training when you change
the parameter, the port stops training and retrains to the new parameter.
Examples In this example, the command sets the maximum interleaved bit rate of the default profile to 3200 kbps
downstream and 640 kbps upstream:
DSLAM# configure terminal
DSLAM(config)# dsl-profile default
DSLAM(config-dsl-prof)# dmt bitrate maximum interleaved downstream 3200 upstream 640
Related Commands Command
show dsl profile
Cisco IOS Release 12.1(6)DA
14
Downstream
Aggregate Path Path
Range Range Default
(kbps) (kbps) (kbps)
8064 to 32 8064 to 32 0
8064 to 32 8064 to 0 0
8064 to 32 8064 to 32 640
8064 to 32 8064 to 0 128
Description
Display a specific profile, all ports to which the profile is currently attached,
and those port settings.
Octal-Port DMT ATU-C Line Card
Upstream
Aggregate Path
Range Range
(kbps) (kbps)
864 to 32 864 to 0
864 to 32 864 to 0
864 to 32 864 to 0
864 to 0 864 to 0
Path
Default
(kbps)
0
0
128
0