Cisco Octal-Port DMT ATU-C Line Card Information Manual page 12

alarms
The alarms command has no effect on critical alarms, major alarms, or minor alarms related to
Note
subsystems other than the DSL subscriber ports.
Examples
In this example, the command enables alarms for the default profile:
DSLAM# configure terminal
DSLAM(config)# dsl-profile default
DSLAM(config-dsl-prof)# alarms
Related Commands Command
dsl-profile profile name
show dsl interface atm slot#/port#
show dsl profile
show facility-alarm status
Cisco IOS Release 12.1(6)DA
12
Description
Select an existing DSL profile for modification.
Display DSL, DMT, and ATM status for a port.
Display a specific profile, all ports to which the profile
is currently attached, and those port settings.
Display the current major and minor alarm status, if any,
and display the configuration of the alarm thresholds.
Octal-Port DMT ATU-C Line Card