Table of Contents
Advertisement
slot
Usage Guidelines
Use the slot command to provision a slot for a line card.
Card mismatch error conditions include the following:
•
•
If you attempt to provision an empty slot, the major alarm "MODULE-MISSING" asserts.
The 8xDMT line card is spectrally incompatible with both the 8-port IDSL line card and the 4-port SDSL
(STU-C) line card. If you install spectrally incompatible cards in the same chassis, the lines served by
those cards can suffer reduced performance. For best performance in a chassis with a mixture of line card
types, always install 8xDMT line cards on one side of the chassis and install IDSL and SDSL cards on
the opposite side.
Examples
The command in this example provisions slot 30 for an 8xDMT line card.
DSLAM# configure terminal
DSLAM(config)# slot 30 ATUC-1-DMT8
Related Commands
Command
show hardware
Cisco IOS Release 12.1(6)DA
26
A line card is already installed in the specified slot
The specified slot contains one type of card but is provisioned for another type
Description
Display information about the physical modules in the chassis.
Octal-Port DMT ATU-C Line Card
Advertisement
Table of Contents
