Lightolier SL403A Specification

Page  of 2
9 /4"
(235 mm)
0 /4"
(260 mm)
Cat. No. Lamp
SL403AH1
SL403AH2 1-150W T7 CMH (M142) (clear)
SL403AHT
Ordering Guide (complete unit only)
Features
Cat. No. Lamp
Cat. No. Lamp (Clear)
Optical System : Single lamp powers an upper wide spaced indirect optic and a lower
SL403AH1
narrow spaced direct sand-blasted optic. Glass shield redirects light into the space.
SL403AH1 -50W T6 CMH (M42) (clear)
Upper wide spaced spun Alzak optic with clear glass micro switch protected. Narrow 1-150W T7 CMH (M142) (clear)
SL403AH2
SL403AH2 -50W T6 CMH (M42) (clear)
spacing spun Alzak downlight optic. Bottom glass sandblasted outer ring with clear
SL403AHT
SL403AHT -50W T6 CMH (M42) (clear)
centre.
Stainless Steel Construction : Quality all stainless steel form and hardware.
Features
Hardware : Exposed hardware adds high design element to the form.
Features
Ballast Compartment : Perforeated stainless steel construction with removeable ballast
Optical System : Single lamp powers an upper wide spaced indirect optic and a lower
cover Hollow rods shield wiring to optical chamber.
1. Optical System: Single lamp powers an upper wide spaced indirect optic
narrow spaced direct sand-blasted optic. Glass shield redirects light into the space.
Optical Chamber : Circular brushed stainless steel construction and all stainless steel
Upper wide spaced spun Alzak optic with clear glass micro switch protected. Narrow and a lower narrow spaced direct sand-blasted optic. Glass shield redirects
hardware.
spacing spun Alzak downlight optic. Bottom glass sandblasted outer ring with clear
light into the space. Upper wide spaced spun Alzak
Ceramic Lamp Source : CMH lamp source assures stable color over the life of the lamp and
centre.
micro switch protected. Narrow spacing spun Alzak
longer lamp life.
Stainless Steel Construction : Quality all stainless steel form and hardware.
Wall Plate : Stainless steel construction with additional holes for securing the installation
glass sandblasted outer ring with clear centre.
Hardware : Exposed hardware adds high design element to the form.
and provided with an overlapping support for Ballast Compartment.
2. Stainless Steel Construction: Quality all stainless steel form and
Ballast Compartment : Perforeated stainless steel construction with removeable ballast
Flange : Stainless steel that separate Wall Plate and Ballast Compartment.
hardware.
cover Hollow rods shield wiring to optical chamber.
3. Hardware: Exposed hardware adds high design element to the form.
Mounting
Optical Chamber : Circular brushed stainless steel construction and all stainless steel
Mounting : Suitable for mounting on standard octogonal box. Must be held in place by 5. Ballast Compartment: Perforated stainless steel construction with
hardware.
additional hardware to support heavy weight luminaire.
removeable ballast cover Hollow rods shield wiring to optical chamber.
Ceramic Lamp Source : CMH lamp source assures stable color over the life of the lamp and
Luminaire Weight : 12.5 lbs (magnetic), 9 lbs (electronic).
6. Optical Chamber: Circular brushed stainless steel construction and all
longer lamp life.
Wall Plate : Stainless steel construction with additional holes for securing the installation
stainless steel hardware.
and provided with an overlapping support for Ballast Compartment.
7. Ceramic lamp source: CMH lamp source assures stable color over the life
Flange : Stainless steel that separate Wall Plate and Ballast Compartment.
of the lamp and longer lamp life.
8. Wall Plate: Stainless steel construction with additional holes for securing
Mounting
the installation and provided with an overlapping support for Ballast
Mounting : Suitable for mounting on standard octogonal box. Must be held in place by
Compartment.
additional hardware to support heavy weight luminaire.
9. Flange: Stainless steel that separate Wall Plate and Ballast Compartment..
Luminaire Weight : 12.5 lbs (magnetic), 9 lbs (electronic).
Mounting
Mounting: Suitable for mounting on standard octogonal box. Must be held in
place by additional hardware to support heavy weight luminaire.
WE RESERVE THE RIGHT TO CHANGE DETAILS OF DESIGN, MATERIALS AND FINISH, IN ANY WAY
Luminaire Weight: 2.5 lbs. (magnetic), 9 lbs. (electronic)
THAT WILL NOT ALTER INSTALLED APPEARANCE OR REDUCE FUNCTION AND PERFORMANCE.
Lightolier Canada, 3015 Louis Amos Lachine, (Quebec) H8T 1C4
Electrical
Lampholder: RX7s, double-ended base.
Electronic Ballast: Electronic Ceramic MH ballast maintains constant lamp
characteristics throughout the life of the lamp and through a wide range of oper-
ating voltages. Ballasts available for 20 and 277 volts operation. No universal
ballast option.
Microswitch: Remote, turn off electricity during maintenance into the lamp
WE RESERVE THE RIGHT TO CHANGE DETAILS OF DESIGN, MATERIALS AND FINISH, IN ANY WAY
compartment.
THAT WILL NOT ALTER INSTALLED APPEARANCE OR REDUCE FUNCTION AND PERFORMANCE.
Lightolier Canada, 3015 Louis Amos Lachine, (Quebec) H8T 1C4
Zylinder Wall
Spectral Architectural Lighting
Optic Forms
Zylinder Wall
1-150W T7 Ceramic Metal Halide
Optic Forms
Zylinder Wall Optic Forms -50W T7 Ceramic Metal Halide
1-150W T7 Ceramic Metal Halide
 /2" 7 /8"
(38 mm) (8 mm)
5 /4"
(387 mm)
Ordering Guide (complete unit only)
Volts
120V (electronic)
277V (electronic)
120/277/347V (mag)
Ordering Guide (complete unit only)
Volts
Volt
120V (electronic)
20V (electronic)
277V (electronic)
277V (electronic)
120/277/347V (mag)
20/277/347V (magnetic)
optic with clear glass
®
downlight optic. Bottom
®
Spectral
Architectural Lighting
Spectral
Architectural Lighting
5 7/8"
(50 mm)
Finish
Stainless Steel & Etched Glass
Electrical
Finish
Finish
Lampholder : RX7s, double-ended base.
Electronic Ballast : Electronic Ceramic MH ballast maintains constant
Stainless Steel & Etched Glass
lamp characteristics throughout the life of the lamp and through a wide Stainless Steel & Etched Glass
Stainless Steel & Etched Glass
range of operating voltages. Ballasts available for 120 volts and 277
Stainless Steel & Etched Glass
volts operation. No universal ballast option.
Microswitch : Remote, turn off electricity during maintenance into the
Electrical
lamp compartment.
Electrical (continued)
H1 : Electronic Ceramic MH / CMH 120V
Lampholder : RX7s, double-ended base.
H2 : Electronic Ceramic MH / CMH 277V
H1: Electronic Ceramic MH / CMH 20V Electronic Ballast : Electronic Ceramic MH ballast maintains constant
Magnetic Ballast : CWA (Constant Wattage Autotransformer) with
H2: Electronic Ceramic MH / CMH 277V lamp characteristics throughout the life of the lamp and through a wide
triple tap 120/277/347 volts operation. Ballast maintains steady lamp
range of operating voltages. Ballasts available for 120 volts and 277
operating characteristics for longer lamp life and color stability. Magnetic Ballast: CWA (Constant Wattage Autotransformer) with triple tap
volts operation. No universal ballast option.
HT : Magnetic CWA MH 120/277/347V
20/277/347 volts operation. Ballast maintains steady lamp operating character-
Microswitch : Remote, turn off electricity during maintenance into the
istics for longer lamp life and color stability.
lamp compartment.

Options and Accessories

H1 : Electronic Ceramic MH / CMH 120V
For pendant unit, see Zylinder Glas SL402. HT: Magnetic CWA MH 20/277/347V
Fuse : 2 Amps internal fusing. Consult your Lightolier representative. H2 : Electronic Ceramic MH / CMH 277V
Options and Accessories
Add code (-F1) for 120 volts, (-F2) for 277 volts or (-F3) for 347
Magnetic Ballast : CWA (Constant Wattage Autotransformer) with
volts.
triple tap 120/277/347 volts operation. Ballast maintains steady lamp
For pendant unit, see Zylinder Glas SL402.
operating characteristics for longer lamp life and color stability.
Finish
Fuse: 2 Amps internal fusing. Consulting your Lightolier representative.
HT : Magnetic CWA MH 120/277/347V
Stainless steel : Brushed high quality stainless steel alloy.
Add code (-F) for 20 volts, (-F2) for 277 volts or (-F3) for 347 volts.
Options and Accessories
Labels
Finish
For pendant unit, see Zylinder Glas SL402.
UL "c/us" Listed. For dry locations only.
Stainless steel: brushed high quality stainless steel alloy.
Fuse : 2 Amps internal fusing. Consult your Lightolier representative.
Add code (-F1) for 120 volts, (-F2) for 277 volts or (-F3) for 347
Labels
volts.
UL "c/us" Listed. For dry locations only.
Finish
Stainless steel : Brushed high quality stainless steel alloy.
Job Information
Labels
UL "c/us" Listed. For dry locations only.
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte company
63 Airport Road, Fall River, MA 02720 • (508) 679-83 • Fax (508) 674-470
We reserve the right to change details of design, materials and finish.
© 2005 Genlyte Group LLC • B0605
01-03
SL403A
SL403A
01-03
SL403A
Type:
www.lightolier.com