Lightolier SL103A Specification

Page 1 of 2
2 1/4"
96"
(57mm)
(2438mm)
16 3/8"
(416mm)
Ordering Guide (complete unit only)
Cat. No. Lamp (linear)
SL103APIU 2-28W T5
SL103API3 2-28W T5
SL103BPIU
2-54W T5 High Output
SL103BPI3 2-54W T5 High Output
Features
1. Form: UltraFlat 1 features low profile 5/8" (16mm) and elegant detailing
sought in architectural flat pendants. The perforated area presents a unique-
ly shaped square-in-square pattern designed to emulate the rectangular
straight lines of the luminaire form. Mitred corner aluminum frame.
2. Optical System: Light is projected through the edge of the specially treated
acrylic surface to give a uniform soft white glow. Direct light passes through
a unique square in square pattern and indirect light is controlled by a wide
spacing optic.
3. Acrylic Element: A cast acrylic element with polished edges and a spe-
cially treated surface to create a soft even glow.
4. Perforated Element: A square in square pattern creates a small downlight
component and a soft balanced glow.
5. Slim Profile: Slim T5 luminaire design profile with matching contoured
forms.
6. Light Distribution: Direct / Indirect light distribution.
7. Central Ballast Channel: Balanced design central ballast channel accepts
all T5 ballasts and emergency options.
8. Suspension: Two 3/64" (1.2mm) steel cables with glider adjusting hardware
for leveling.
Mounting
Dual Mount Canopy: Dual cable Spectral canopy suitable for mounting on
standard octagonal box for plaster ceiling, exposed ceiling or T-Bar ceiling
mounts.
Twin Adjustable Cable: Twin steel cables adjust for height leveling.
Mounting Height: Luminaire comes standard with 8' (2.4 meters) of mounting
steel cables and electrical wires.
Luminaire Weight: 24 lbs.
Electrical
Ballast: Electronic Program Rapid Start slim profile 2-lamp T5 linear ballast.
Universal voltage "U" ballasts automatically detect 120 volts or 277 volts opera-
tion.
Lampholder: G5 AirPass Rotor base, miniature Bi-pin.
Cord: Lightolier cords 300 volts for 120/277 volts operation or 600 volts for 120/
277/347 volts operation. 18AWG AWM leads, 10 Amps maximum. White color.
Wiring: Luminaires come prewired. No need to open luminaire for wiring.
Spectral Architectural Lighting
46 7/8"
(1191mm)
57 1/4"
(1454mm)
Volt Finish
120/277V Textured Light Grey & Clear Acrylic with White Lacquer
347V Textured Light Grey & Clear Acrylic with White Lacquer
120/277V Textured Light Grey & Clear Acrylic with White Lacquer
347V Textured Light Grey & Clear Acrylic with White Lacquer

Options and Accessories

Dimming: Full range of analog or digital T5 dimming ballast option. Use
Lightolier fluorescent ballast designations.*
Emergency: Bodine emergency battery pack. The emergency ballast senses
the power failure and immediately switches to the emergency mode illuminate
one lamp at a reduced lumen output for a minimum 90 min. The battery fully
recharges within 24 hours. Add code (-EM).
Fuse: 2 Amps internal fusing.*
Add code (-F1) for 120 volts, (-F2) for 277 volts or (-F3) for 347 volts.
DALI Interface: Digital Addressable Lighting Interface available upon request
for individual luminaire addressable control.*
Color End Luminious Element: Available in blue and green.
Radio Interference Filter: Inductive capacitor circuit designed interference
from line radiation or feedback. Add code (-RFI).
Finish
All painted parts are with powder coat paint process.
Labels
UL "c/us" Listed. Suitable for damp locations.
* Consult your Lightolier representative for more information.
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2005 Genlyte Group LLC • B0605
UltraFlat 1 Flat Forms 2-28W/54W T5
Type:
a Genlyte company
SL103A
2 3/8"
(60mm)
www.lightolier.com