Table of Contents
Advertisement
9.2.
Reassembly Instructions
9.2.1.
Attention when CF-08 series is repaired
• Please execute writing BIOS ID when you exchange the Main Board.
• Parts (Sheet and rubber) etc. related various the Conductive Cloth and Heat Spreader cannot be recycled. Use new parts.
9.2.2.
Setting the LCD Unit and the Inverter
1. Attach the LCD Unit.
2. Attach the TS Noise Tape.
3. Put the Cable into the Clamper.
4. Attach the Pet Tape.
5. Connect the Cable to the Inverter connector.
9-6
Advertisement
Table of Contents
