Table of Contents
Advertisement
5 Diagnosis & Repair
5.1. Basic Procedures
The basic procedures for diagnosis, disassembly, and test of defective parts of a set to be repaired are summarized below.
For details, refer to relevant pages in the Service Manual.
Flow Chart
DEFECTIVE PARTS
SORTING
REPAIR WORK
INSPECTION
OCCURRENCE OF
TROUBLE
Self Test Program
Self Test Program start up.
NORMAL FINISH
OK
TROUBLESHOOTING
DISASSEMBLY PROCEDURE
Replace defective parts.
Self Test Program
After repair, make sure that the repaired
set operates properly.
END OF
REPAIR WORK
5-1
Insert the AC plug.
ERROR
OCCURRENCE
FAULT
TEST OK
Press the Power button,
while pressing the USER button
and the Cursor control button
at the same time.
Advertisement
Table of Contents
