Panasonic CF-08TX1A1M Service Manual page 42

9.2.12. Setting the Main PCB
1. Connect the Cable to the Connector (CN7) of the Main
PCB.
2. Fix the Main PCB using four Screws <N1>. No1 to No4
3. Connect the Cables to the six Connectors
(CN3,CN4,CN9,CN10,CN12,CN13) of the Main PCB.
Note:
Tighten the Screws in the numbered order (No1 to No4).
Screws <N1>:XSB2+4FNL
9-18