9.1.6.
Removing the WLAN PCB
1. Remove the two Antenna Cables.
2. Remove the four Screws <N1>.
3. Remove the Lamp Cable Spring.
4. Remove the WLAN PCB.
Screws <N1>:XSB2+4FNL
9.1.7.
Removing the Audio Con PCB
1. Disconnect the Cable from the Connector (CN300).
2. Remove the Edge Sheet.
3. Remove the two Screws <N1>.
4. Remove the Audio Con PCB.
Screws <N1>:XSB2+4FNL
9.1.8.
Removing the Speaker
1. Remove the two Screws <K1-1-2>.
2. Remove the Speaker Hold Sheet.
3. Remove the Speaker fixed with the two-sided tape.
Screws <K1-1-2>:XSB2+4FNL
9.1.9.
Removing the USB PCB
1. Remove the two Screws <N1>.
2. Disconnect the Cable from the Connector (CN400).
3. Remove the USB Hold Plate and the USB PCB.
Screws <N1>:XSB2+4FNL
9-3