Table of Contents
Advertisement
A. Auto Launch
B. Wait for Network Connection
• When the Supervisor does not
add the check mark for [Allow
Change Auto Launch] in the
[User] tab of the [Security Set-
tings (Supervisor)] screen, [Auto
Launch] and [Wait for Network
Connection] cannot be set here.
When terminating the connection
Perform the following operation.
Tap [Start] - [Log Off] - [Log Off].
CAUTION
If you tap [Start] - [Shut Down], the power for the server itself will be turned off.
Make the settings (only for the Supervisor)
When settings have been changed
Before turning off the wireless display, save (back up) the settings making refer-
9
ence to step
in "First-time Operation" .
When deleting settings
Perform the following procedure.
A A Double-tap
B Connect your wireless display to a power outlet.
C Tap [Delete Backup].
When the confirmation message appears, tap [Yes].
Deleting data will start.
D When the message "Backup data has been deleted." appears, tap
NOTE
NOTE
When you turn on the wireless display next time, the calibration screen will
appear.
C. Password
To set the password
• If a User Password has been set in the
[User] tab of [Security (Supervisor)]
screen, User cannot delete a password.
• If a User Password has not been set in
the [User] tab of [Security (Supervisor)]
screen, User cannot create a new
password.
<Only when making connections with Microsoft
Remote Desktop Connection>
You can terminate the connection using the following
operation.
Tap
(A), and when the message appears, tap
on the desktop and double-tap [Flash Delete].
4-2
®
.
.
Advertisement
Table of Contents
