Panasonic CF-08TX1A1M Service Manual page 28

Wireless display
Hide thumbs Also See for CF-08TX1A1M:
Table of Contents

Advertisement

9.1.10. Removing the WLAN L PCB
1. Remove the Insulation Sheet.
2. Remove the Screw <N7>.
3. Remove both the Antenna Cable and the WLAN L PCB.
Screw <N7>:DFHE5025XA
9.1.11. Removing the Bluetooth WLAN R
PCB
1. Remove the two tapes.
2. Remove the Screw <N7>.
3. Remove both the Antenna Cable and the Bluetooth
WLAN R PCB.
Screw <N7>:DFHE5025XA
9.1.12. Removing the Dock Con PCB
1. Remove the FFC Hold Cushion.
2. Disconnect the two Cables from the Connectors
(CN600,CN601).
3. Remove the five screws <N3>.
4. Remove the Base Joint Cover, the Docking PCB Sheet
and the Dock Con PCB.
Screws <N3>:DXQT26+D5FNL
9.1.13. Removing the SW LED PCB
1. Remove the three Screws <N2>.
2. Remove the SW Board Stopper Plate.
3. Disconnect the two Cables from the Connectors
(CN500,CN501).
4. Remove the SW LED PCB.
Screws <N2>:DRSB2+5FKL
9-4

Advertisement

Table of Contents
loading

Table of Contents