Panasonic CF-08TX1A1M Service Manual page 41

9.2.10. Setting the WLAN PCB
1. Fix the WLAN PCB and the lamp Cable Spring using four
Screws <N1>.
2. Fix the two Antenna Cables.
Screws <N1>:XSB2+4FNL
9.2.11. Setting the IO Power PCB
1. Fix the IO Power PCB using eight Screws <N1>. No1 to
No8
2. Connect the Cable to the Connector (CN8) of the IO
Power PCB.
3. Attach the Edge Sheet.
Note:
Tighten the Screws in the numbered order (No1 to No8).
Screws <N1>:XSB2+4FNL
9-17