Panasonic CF-08TX1A1M Service Manual page 35

I Assembly of the LCD Block
9.2.3. Setting the SW LED PCB
1. Connect the Cable to the connector (CN501) of the SW
LED PCB.
2. Attach the tape.
3. Fix the SW LED PCB and SW Board Stopper Plate using
three Screws <N2>. No1 to No3
4. Put the Cable into the Clamper.
Note:
Tighten the Screws in the numbered order (No1 to No3).
Screws <N2>:DRSB2+5FKL
9-11