Table of Contents
Advertisement
Installing the USB Touch Driver
Installing the USB Touch Driver for Windows XP, Windows
2
2000
, Me and 98
1
Insert the Elo CD-ROM in your computer's CD-ROM drive.
If Windows 98, Windows Me or Windows 2000 starts the Add New
Hardware Wizard:
2
Choose Next. Select "Search for the best driver for your device
(Recommended)" and choose Next.
3
When a list of search locations is displayed, place a checkmark on "Specify a
location" and use Browse to select the \EloUSB directory on the Elo CD-
ROM.
4
Choose Next. Once the Elo TouchSystems USB touchscreen driver has been
detected, choose Next again.
5
You will see several files being copied. Insert your Windows 98 CD if
prompted. Choose Finish.
If Windows 98, Windows Me or Windows 2000 does not start the Add New
Hardware Wizard:
NOTE: For Windows 2000 you must have administrator access rights to install the driver.
1
Insert the Elo CD-ROM in your computer's CD-ROM drive. If
the AutoStart feature for your CD-ROM drive is active, the
system automatically detects the CD and starts the setup
program.
2
Follow the directions on the screen to complete the driver setup
for your version of Windows.
If the AutoStart feature is not active:
1
Click Start > Run.
1
Click the Browse button to locate the EloCd.exe program on
the CD-ROM.
2
Click Open, then OK to run EloCd.exe.
3
Follow the directions on the screen to complete the driver setup
for your version of Windows.
2.To install Windows 2000 and Windows XP, you must use the "update
driver" method; you will not find a setup.exe file within the download.
Elo Entuitive Touchmonitor User Guide
28
Advertisement
Table of Contents
