Step 3-Connecting the Serial or USB Touchscreen Cable
•
Connect the female end of the serial (RS-232) cable to the serial port on
the back of your PC, or connect the USB touchscreen cable to the USB
touchscreen connector on the back of your touchmonitor.
•
Connect the male end of the cable to the serial touchscreen connector
on your touchmonitor, or connect the other end of the USB touchscreen
cable to your PC.
•
Secure the cable to your touchmonitor and PC by turning the screws on
the connector.
•
Route the cable through the cable management clip.
Elo Entuitive Touchmonitor User Guide
16