Upgrading The Device In Bay Two - EUROCOM 5600N San Remo User Manual

Upgrading the Device in Bay Two

If you need to upgrade or replace the device in Bay Two then follow
this procedure, however take note of the warrantee warning on the
right.
1. Turn the computer OFF.
2. Place the computer on a clean, stable surface and turn it over.
3. Remove screw "1" (Figure 6 - 1).
1
Upgrading the Device in Bay Two 6 - 9
Upgrading The Computer
Warrantee Warning
Please check with your
service representative
before undertaking any
upgrade procedures to
find out if this will VOID
your warrantee.
Figure 6 - 5
Bay Two Screw
Location
6