Modem (Winme) - EUROCOM 5600N San Remo User Manual

Drivers & Utilities

Modem (WinME)

1. Click Start (menu), point to Settings and
click Control Panel . Double-click Sys-
tem (icon) and then click Device Man-
ager .
4
2. Click "+" next to Other devices (if its
sub-items are not shown).
3. Double-click PCI Card and click Rein-
stall Driver (button).
4. When the Update Device Driver Wizard
appears, select " Specify the location of
the driver (advanced) " and click Next .
5. Make sure that you have selected
" Search for a better driver than the
one your device is using now .".
6. Select ONLY (make sure the other boxes
do not have a tick inside them) " Specify
a location" , and navigate ( Browse... ) to
D:\Drivers\Modem\WinMe .
7. Click OK > Next > Next .
8. When the Add New Hardware Wizard
appears repeat the process outlined in
Steps 4 through 7 and click Finish .
4 - 12 Windows ME
9. After the updated driver is installed, click
Finish again.
10. Close the Smart Link 56K Voice
Modem Properties and System Proper-
ties (dialog box) .
11. The modem is ready for dial-up configu-
ration.
Modem Country Selection
Be sure to check if the modem country selection
is appropriate for you. (Control Panel >Modem