The Power-On Self Test (Post) - EUROCOM 5600N San Remo User Manual

BIOS Utilities

The Power-On Self Test (POST)

Each time you turn on the computer, the system takes a few seconds
to conduct a POST, including a quick test of the on-board RAM.
As the POST proceeds, the computer will tell you if there is anything
wrong. If there is a problem which prevents the system from booting,
5
it will display a system summary and prompt you to run Setup.
If there are no problems, the Setup prompt will disappear and the
system will load the operating system. Once that starts, you can't get
into Setup without rebooting.
The Power-On Self Test (POST) 5 - 3