EUROCOM 1100-P Owner's Manual page 107

5-6
Step V: PCMCIA Driver Installation
m
Under Win95, click [Start]; open [Settings], [Control Panel], [System],
[Device Manager], select [Other Devices] and remove [PCI CardBus
Bridge]. Select [Ok]
m
Under Control Panel, choose [Add New Hardware]; click [No]
[Next]
[Browse]. Choose the file [pcmcia.inf] from the disk or CD to install.
Click the following one by one, [Manufacture Texas Instruments]
[Texas Instruments]
[Finish].
m
Before restarting the system, copy the file [PCMCIA.inf] to
[c:\windows\inf] and the files [CBSS.vxd], [PCCARD.vxd], [PCI.vxd]
to the sub-directory [C:\windows\system]
Note: Make sure whether the files are copied to drive C successfully.
[c:\windows\system\cbss.vxd][c:\ windows\system\pccard.vxd]
[c:\windows\system\pci.vxd] [ c:\windows\inf\pcmcia.inf]
Step VI: Video-in Driver Installation
m
Boot the system, switching to SCU system by press keys Ctrl+Alt+S
before running Windows. Choose [Components] from the top of the
screen. Choose [Enable] for [Video-In Mode]
m
Under Windows, Select [Start], [Run] and open the path [D:\video-in
\setup.exe] to comp lete the installation.
User's Manual
[Add PCMCIA Socket]
[PCI-1225 CardBus Control]
[Next] [Have Disk]
[Next] [Next]