Conserving Power Through Individual Components; Hard Disk Standby; Monitor Standby; Conserving Power Throughout The Whole System - EUROCOM 2700T VIPER User Manual

User's Manual
! ! ! ! !
Note
Hard Disk
Standby can be
3
set in the SCU
and the operat-
ing system you
are using. The
SCU settings
will override the
operating sys-
tem settings.
! ! ! ! !
Note
To learn more
about power
management
settings in the
SCU, refer to
Chapter 5,
Power Menu.
3 - 2

Conserving Power through Individual Components:

Hard Disk Standby

The computer's hard disk drive motor will be turned off if the hard disk drive
has not been accessed for a specified period of time. If the system reads or
writes data, the hard disk motor will be turned back on. You can set this in the
control panel of your OS or in the SCU.

Monitor Standby

To conserve power, you can set the monitor to turn off after a specified time.
This is done in the operating system.

Conserving Power throughout the Whole System:

Suspend and Resume

With this function you can stop the notebook's operation and restart where you
left off. This system features two suspend mode levels:

A: Standby

B: Hibernate
A: Standby
Standby saves the least amount of power, but takes the shortest time to return