Step 5: Installing The Modem Driver (Optional) - EUROCOM 2700T VIPER User Manual

User's Manual
6
Note
Before install-
ing the Modem
driver, go to
SCU by press-
ing
CTRL+ALT+S
on boot, and
disable PNP
OS Support
(Startup menu)
and set COM B
to "None" (Com-
ponents menu).
6 - 22
8: Specify the path to D:\Lan\Nt40. Press OK.
9: Click OK again to accept the driver "SiS 900 PCI Fast Ethernet Adapter".
10:Click Next.
11: Choose the appropriate Network Services. You may want to contact your
system adminstrator for the correct protocols.
12:Choose the appropriate Network Services. You may want to contact your
system adminstrator for the correct services.
- If you are prompted for Windows NT Setup, insert the Windows NT CD
disk and specify the CD-ROM drive.
- Follow the on-screen instructions, and continue to press Continue.
- When prompted whether you wish to use DHCP, choose No.
- When the "Microsoft TCP/IP Properties" window appears, configure the
setting according to your PC's status and click OK.
- Follow the on-screen instructions and continue to press Next.
13:Click Finish and restart the computer.
For more information on the driver, refer to the Readme file under the direc-
tory.

Step 5: Installing the Modem Driver (Optional)

1: Click Start.
2: Select Run.
3: Specify the path to D:\Mdc\Nt40\Setup.exe.