Installing Drivers In Windows 98 Se; Step 1: Installing The Audio Driver - EUROCOM 2700T VIPER User Manual

Installing Drivers in Windows 98 SE

Step 1: Installing the Audio Driver

A: Installing the Audio Driver without S/PDIF output support
1: Click Start.
2: Select Run.
3: Specify the path to D:\Audio\Setup.exe
4: Run Setup.exe.
5: Follow the on-screen instructions, and continue to press Next.
6: Click Finish to restart your computer.
For more information on the driver, refer to the Readme file under the direc-
tory.
B: Installing the Audio Driver with S/PDIF output support
1: Remove the previous audio driver if already installed.
2: Reboot the computer and go to the SCU by pressing Ctrl+Alt+S.
3: Enable S/PDIF digital output feature (Startup menu) and exit SCU.
4: Start Windows, and insert the DVD utility disk to install the DVD driver
and application. The installation program automatically runs when you
insert the DVD disk into the DVD-ROM drive.
5: After completing installing DVD driver and player, click Start and select
Settings and Control Panel.
6: Double click the System icon.
Driver Installation
Note
S/PDIF can
only be used
with models or
configurations
which have a 6
DVD drive.
6 - 7